Loading...
 

Equations of Free Energy

The Equations of Free Energy

The Pseudo-Equations: Let us use the following subscripts and letter convention, and develop the nomenclature needed:

T = trapped                                d = dissipated or dissipating

m = translated (moving)              K = energy

V = volts = potential drop (potential dissipated) = previously collected potential radiated away as heat in a load, doing work on the load in the process. Unfortunately, we shall also have to speak of a potential gradient that is not being dissipated, so we shall have to speak of "trapped volts" which is erroneous, but complies with the common usage.

f = electrostatic scalar potential.              Coul = coulombs

i = amperes = Dissipating potentialized coulombs per second flowing, so amps are something translating, always. Amps are excited coulombs, per second, that are dissipating their excitation. With superconductivity excluded, you only have amps when you have a potential drop across a load. So we will speak of amps as "dissipating," meaning that potentialized electrons are traveling through a load, dissipating their activation (gradients) in the load by radiating scattered photons (heat).

n = number of electrons in a coulomb = 6.3 x 1018 electrons/coulomb

Here are the pseudo equations (superconductivity is excluded):

ampm = could/sec = n electronsm/sec = n electronsd/sec [1]

Df = VT (as conventionally referred to). It would be volts if all [2] of it were dissipated, but it is not yet dissipated, so it is sort of "trapped volts". Erroneous, but the common use. So we will speak (somewhat distastefully) of "trapped volts" and "dissipated volts."

Vd x ampd x sec = watts x sec = power x time = work = Kd [3]

Vd x could/sec x sec = (work) = Kd [4]

In the switching, we switch KT to Kd so

KT Þ Kd [5]

But VT x coulT = KT [6]

Or

[VT] = [KT] / [coulT] = trapped energy/trapped coulomb [7]

[KT] = [VT] x [coulT] = amount of trapped energy, each cycle [8]

So that's what we were getting at. The amount of trapped energy you can transfer (in other words, how much coal you get in one shovelful) depends upon the number of trapped electrons you have in the trapped free electron gas in the collector, and the potential gradient you apply to those trapped coulombs to potentialize them. [Bearden, The Final Secret of Free Energy]

Created by Dale Pond. Last Modification: Thursday April 19, 2018 03:35:11 MDT by Dale Pond.